31/12/23

Been out of the country for a month, weather all over the place and the T6 has sat doing nothing! So on a rainy overcast day thought would be a good time to check the batteries and circuit board.

Victron app showed both main and leisure batteries were charged etc.

So put the multimeter on the 2 batteries and the 12v panel electrics. 

All showing over 13v  so the victron mpp3 unit is doing its job! 

12v Electrical Board 28/11/23

Final stages, covering the 12v electric circuit board! Just the 12v electricity sticker to fit when arrives. Used a couple of bed side rail brackets so it just drops onto the side panels. Was a bit of a nightmare lining up the 2 brackets as I needed to drop the panel down a couple of inches! Also probably paint the side panels as well later.

12v warning sticker in place 03/11/23

27/10/23 Added some trim to front of shelves. and cut them down 8 mm as when the sliding door was shut the table left an imprint

small table added to the side unit just right for coffee or beer!

Using up leftover wood

Small side unit by RIB seat unit. 

Finishing touches 14/7/23

Edging fitted to edges of toilet box. Just have to build a cover for the 12v / solar electrical panel. But a trip to B&Q needed as I've no MDF left . Idea is make a front cover with 2 sides, and using hook style catches fitted to back board it will just slot on.Top and bottom will remain open to allow airflow. Daffy Duck is van mascot teddy bear is our eldest grandson who wanted him to be in van . The blue "gremlin" in the middle is a Orchid Orchid Gnome made by by sister , mainly taking the P as she can't grow orchids. 😂

Nearly Finished!

Porta potty in place and secured with foot plate! 

So usable at last!

Cushion will have new cover colour similar to paintwork. 

Just the wiring board to box in now! 

And add some black trim to the loo box!